Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SMPC22A-M3/86A
詳細を表示 DataSheets

SMPC22A-M3/86A

Introduction

The SMPC22A-M3/86A is a semiconductor product belonging to the category of power management and protection devices. This device is commonly used in various electronic applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Power Management and Protection Device
  • Use: Protecting electronic circuits from overvoltage and overcurrent conditions
  • Characteristics: High efficiency, low power dissipation, compact size
  • Package: SMC (DO-214AB), D2PAK (TO-263)
  • Essence: Safeguarding electronic components from damage caused by electrical faults
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Voltage Rating: 22V
  • Current Rating: 3A
  • Operating Temperature Range: -55°C to 150°C
  • Reverse Standoff Voltage: 19.9V
  • Breakdown Voltage: 22.1V
  • Clamping Voltage: 35.5V
  • Peak Pulse Current: 43.5A

Detailed Pin Configuration

The SMPC22A-M3/86A has a standard pin configuration with three pins: Anode, Cathode, and Gate.

Functional Features

  • Overvoltage Protection: Safeguards against voltage spikes and surges
  • Overcurrent Protection: Limits current flow during fault conditions
  • Fast Response Time: Rapid reaction to transient events
  • Low Clamping Voltage: Ensures minimal stress on protected circuits

Advantages and Disadvantages

Advantages: - Effective protection against voltage transients - Low clamping voltage reduces stress on connected components - Fast response time for rapid fault mitigation

Disadvantages: - Limited to specific voltage and current ratings - May require additional circuitry for comprehensive protection in complex systems

Working Principles

The SMPC22A-M3/86A operates based on the principles of zener diode breakdown and avalanche breakdown. When an overvoltage event occurs, the device rapidly conducts, diverting excess current away from the protected circuit.

Detailed Application Field Plans

This device finds extensive use in various applications, including: - Power supplies - Industrial control systems - Automotive electronics - Telecommunication equipment - Consumer electronics

Detailed and Complete Alternative Models

  • SMPC10A-M3/86A: Lower voltage rating (10V) and current rating (3A)
  • SMPC30A-M3/86A: Higher voltage rating (30V) and current rating (3A)
  • SMPC22A-M3/85A: Similar specifications with different packaging options

In conclusion, the SMPC22A-M3/86A serves as a crucial component in protecting electronic circuits from damaging voltage transients and overcurrent conditions. Its efficient operation, compact design, and fast response time make it an essential part of modern electronic systems.

Word Count: 410

技術ソリューションにおける SMPC22A-M3/86A の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is SMPC22A-M3/86A?

    • SMPC22A-M3/86A is a specific type of diode, commonly used in power supply and rectification applications.

  2. What are the key specifications of SMPC22A-M3/86A?

    • The key specifications include a maximum repetitive peak reverse voltage of 220V, forward current of 2A, and a low forward voltage drop.

  3. In what technical solutions can SMPC22A-M3/86A be used?

    • SMPC22A-M3/86A can be used in various technical solutions such as power supplies, battery chargers, LED lighting, and automotive electronics.

  4. What are the advantages of using SMPC22A-M3/86A in technical solutions?

    • The advantages include high efficiency, fast switching speed, low power loss, and compact size.

  5. How does SMPC22A-M3/86A compare to other diodes in similar applications?

    • Compared to other diodes, SMPC22A-M3/86A offers lower forward voltage drop, higher current capability, and better thermal performance.

  6. What are the recommended operating conditions for SMPC22A-M3/86A?

    • The recommended operating conditions typically include a maximum junction temperature, forward current, and reverse voltage to ensure optimal performance and reliability.

  7. Are there any application notes or reference designs available for using SMPC22A-M3/86A?

    • Yes, manufacturers often provide application notes and reference designs to assist engineers in implementing SMPC22A-M3/86A in their technical solutions.

  8. What are the typical failure modes associated with SMPC22A-M3/86A?

    • Typical failure modes may include thermal runaway, reverse voltage breakdown, and excessive forward current leading to overheating.

  9. Can SMPC22A-M3/86A be used in high-frequency applications?

    • Yes, SMPC22A-M3/86A is suitable for high-frequency applications due to its fast switching speed and low capacitance.

  10. Where can I purchase SMPC22A-M3/86A for my technical solution?

    • SMPC22A-M3/86A diodes are available through authorized distributors and online electronic component suppliers. It's important to source them from reputable sources to ensure authenticity and quality.