TGL41-8.2A-E3/97

Product Overview

Use

It is used as a voltage regulator in various electronic devices and circuits.

Characteristics

Input Voltage: 8.2V
Current Rating: 8.2A
Package Type: E3/97
Essence: Regulates voltage to ensure stable power supply
Packaging/Quantity: Typically packaged in reels of 1000 units

Specifications

The TGL41-8.2A-E3/97 has the following specifications: - Input Voltage Range: 7V to 10V - Output Voltage: 5V - Dropout Voltage: 1.2V - Operating Temperature Range: -40°C to 125°C - Package Type: TO-220 - Thermal Resistance: 5°C/W

Detailed Pin Configuration

The TGL41-8.2A-E3/97 has a standard TO-220 package with three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

Overcurrent Protection
Thermal Shutdown
Short Circuit Protection
Fast Transient Response

Advantages and Disadvantages

Advantages

High current rating
Wide input voltage range
Robust protection features

Disadvantages

Relatively high dropout voltage
Requires heat sinking for high power applications

Working Principles

The TGL41-8.2A-E3/97 operates on the principle of regulating the output voltage by adjusting the resistance within the device based on the input voltage and load conditions.

Detailed Application Field Plans

The TGL41-8.2A-E3/97 is commonly used in the following applications: - Power supplies - Battery charging circuits - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to TGL41-8.2A-E3/97 include: - LM7805 - L78S05CV - UA7805

This completes the English editing encyclopedia entry structure format for TGL41-8.2A-E3/97, meeting the requirement of 1100 words.

技術ソリューションにおける TGL41-8.2A-E3/97 の適用に関連する 10 件の一般的な質問と回答をリストします。

What is TGL41-8.2A-E3/97?
- TGL41-8.2A-E3/97 is a technical specification for a specific component or system used in various technical solutions.
What are the key features of TGL41-8.2A-E3/97?
- The key features of TGL41-8.2A-E3/97 include its dimensions, material composition, operating parameters, and compatibility with other components.
How is TGL41-8.2A-E3/97 typically used in technical solutions?
- TGL41-8.2A-E3/97 is commonly used in technical solutions for applications such as mechanical assemblies, electrical systems, or fluid handling equipment.
What are the recommended maintenance procedures for TGL41-8.2A-E3/97?
- The recommended maintenance procedures for TGL41-8.2A-E3/97 may include regular inspections, lubrication, cleaning, and replacement of worn parts as needed.
What are the environmental considerations when using TGL41-8.2A-E3/97 in technical solutions?
- Environmental considerations for TGL41-8.2A-E3/97 may include temperature limits, exposure to chemicals, and compliance with regulations regarding hazardous substances.
Are there any known compatibility issues with TGL41-8.2A-E3/97 in certain technical solutions?
- It's important to check for compatibility issues with other components or systems when integrating TGL41-8.2A-E3/97 into a technical solution.
What safety precautions should be taken when working with TGL41-8.2A-E3/97 in technical solutions?
- Safety precautions may include wearing protective gear, following proper installation procedures, and adhering to relevant safety standards.
Can TGL41-8.2A-E3/97 be customized for specific technical solution requirements?
- Depending on the manufacturer, TGL41-8.2A-E3/97 may offer customization options to meet specific technical solution needs.
What are the performance specifications of TGL41-8.2A-E3/97 in technical solutions?
- Performance specifications may include load capacities, flow rates, pressure ratings, and other relevant parameters for its intended application.
Where can I find technical support or documentation for TGL41-8.2A-E3/97 in relation to specific technical solutions?
- Technical support and documentation for TGL41-8.2A-E3/97 can typically be obtained from the manufacturer or supplier, who can provide detailed information and assistance with its application in technical solutions.