Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLZ43-GS08
詳細を表示 DataSheets

TLZ43-GS08

Product Overview

TLZ43-GS08 belongs to the category of voltage regulators. It is commonly used to regulate voltage in electronic circuits, providing stable and reliable power supply. The characteristics of TLZ43-GS08 include its compact size, high efficiency, and low power consumption. It is typically packaged in a small outline transistor (SOT-23) package and is available in various quantities per package.

Specifications

  • Input Voltage Range: 3V to 30V
  • Output Voltage Range: 1.25V to 28V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

TLZ43-GS08 has three pins: 1. Vin (Input) 2. Vout (Output) 3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Good thermal performance

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise

Working Principles

TLZ43-GS08 operates by comparing the reference voltage with the feedback voltage to maintain a stable output voltage. When the input voltage fluctuates, the internal circuitry adjusts the output voltage to ensure a constant supply.

Detailed Application Field Plans

TLZ43-GS08 is commonly used in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is essential. It is also suitable for IoT devices, sensor modules, and handheld instruments.

Detailed and Complete Alternative Models

Some alternative models to TLZ43-GS08 include LM2937, MCP1700, and XC6206. These alternatives offer similar voltage regulation capabilities and can be used as substitutes depending on specific application requirements.

This entry provides a comprehensive overview of TLZ43-GS08, covering its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける TLZ43-GS08 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TLZ43-GS08?

    • The TLZ43-GS08 is a low VF Schottky barrier diode designed for high-speed switching applications.

  2. What are the key features of TLZ43-GS08?

    • The key features include low forward voltage drop, fast switching speed, and high reliability.

  3. What are the typical applications of TLZ43-GS08?

    • Typical applications include power supply rectification, freewheeling diodes, and reverse polarity protection.

  4. What is the maximum forward voltage of TLZ43-GS08?

    • The maximum forward voltage is typically around 0.45V at a forward current of 1A.

  5. What is the reverse recovery time of TLZ43-GS08?

    • The reverse recovery time is typically in the range of 15-30ns.

  6. What is the maximum forward current rating of TLZ43-GS08?

    • The maximum forward current rating is typically around 3A.

  7. What is the operating temperature range of TLZ43-GS08?

    • The operating temperature range is usually from -65°C to +125°C.

  8. Does TLZ43-GS08 require a heatsink for certain applications?

    • For high current or high-frequency applications, a heatsink may be recommended to ensure optimal performance and reliability.

  9. Is TLZ43-GS08 suitable for automotive applications?

    • Yes, TLZ43-GS08 is often used in automotive systems such as LED lighting, motor control, and battery management.

  10. Are there any potential issues with using TLZ43-GS08 in high-frequency circuits?

    • In high-frequency circuits, parasitic capacitance and inductance should be carefully considered to minimize any potential issues with ringing or oscillation.