TZMC27-M-08
Product Overview
Category
The TZMC27-M-08 belongs to the category of semiconductor devices.
Use
It is commonly used for voltage regulation and transient suppression in electronic circuits.
Characteristics
- Low leakage current
- Fast response time
- High surge capability
Package
The TZMC27-M-08 is typically available in a DO-213AB (MELF) package.
Essence
This product is essential for protecting sensitive electronic components from voltage spikes and transients.
Packaging/Quantity
It is usually packaged in reels with quantities varying based on manufacturer specifications.
Specifications
- Breakdown Voltage: 27V
- Power Dissipation: 500mW
- Maximum Clamping Voltage: 44.4V
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The TZMC27-M-08 typically has two pins, with the anode connected to one pin and the cathode to the other.
Functional Features
- Provides effective voltage clamping during transient events
- Limits the voltage across sensitive components
- Rapid response to transient voltage surges
Advantages
- Low leakage current ensures minimal power loss
- Fast response time provides quick protection
- High surge capability for robust transient suppression
Disadvantages
- Limited to specific breakdown voltages
- May require additional circuitry for comprehensive overvoltage protection
Working Principles
The TZMC27-M-08 operates based on the principle of Zener breakdown, where it conducts current when the voltage across it exceeds the breakdown voltage, effectively clamping the voltage to a safe level.
Detailed Application Field Plans
- Used in power supplies to protect against voltage transients
- Incorporated into communication equipment to safeguard sensitive components
- Employed in automotive electronics for surge protection
Detailed and Complete Alternative Models
- BZT52C27S-7-F
- P6KE27CA
- 1N5227B
In conclusion, the TZMC27-M-08 is a crucial semiconductor device that offers efficient voltage regulation and transient suppression in various electronic applications, making it an indispensable component in modern electronic designs.
技術ソリューションにおける TZMC27-M-08 の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure, here are 10 common questions and answers related to the application of TZMC27-M-08 in technical solutions:
What is the maximum voltage rating of TZMC27-M-08?
- The maximum voltage rating of TZMC27-M-08 is 27V.
What is the power dissipation of TZMC27-M-08?
- The power dissipation of TZMC27-M-08 is 500mW.
What is the forward voltage drop of TZMC27-M-08 at a specified current?
- The forward voltage drop of TZMC27-M-08 is typically 0.62V at 10mA.
Can TZMC27-M-08 be used for overvoltage protection in electronic circuits?
- Yes, TZMC27-M-08 can be used for overvoltage protection due to its Zener diode characteristics.
What is the temperature coefficient of TZMC27-M-08?
- The temperature coefficient of TZMC27-M-08 is typically 0.05%/°C.
Is TZMC27-M-08 suitable for voltage regulation applications?
- Yes, TZMC27-M-08 can be used for simple voltage regulation tasks within its specified parameters.
What is the maximum reverse leakage current of TZMC27-M-08 at its rated voltage?
- The maximum reverse leakage current of TZMC27-M-08 is typically 0.5µA at its rated voltage.
Can TZMC27-M-08 be used in automotive electronics applications?
- Yes, TZMC27-M-08 is suitable for use in automotive electronics where its voltage clamping and regulation properties are required.
What is the typical response time of TZMC27-M-08 to an overvoltage event?
- The typical response time of TZMC27-M-08 to an overvoltage event is in the nanosecond range, making it effective for transient suppression.
Are there any specific layout considerations when using TZMC27-M-08 in a PCB design?
- It is recommended to keep short traces between TZMC27-M-08 and the protected circuitry and to minimize parasitic inductance for optimal performance.
These questions and answers should provide a good overview of the application of TZMC27-M-08 in technical solutions.