Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
VS-60APH03-N-S1

VS-60APH03-N-S1

Introduction

The VS-60APH03-N-S1 is a power module belonging to the category of voltage regulators. This device is designed for use in various electronic applications, offering specific characteristics and advantages.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High efficiency, compact size, low noise
  • Package: Module form factor
  • Essence: Stabilizing input voltage to provide a consistent output
  • Packaging/Quantity: Typically sold individually or in small quantities

Specifications

  • Input Voltage: 12V
  • Output Voltage: 5V
  • Maximum Current: 3A
  • Efficiency: 90%
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

The VS-60APH03-N-S1 features a standard pin configuration with input, output, and ground pins. The specific pinout can be found in the product datasheet.

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in input voltage or load.
  • Overcurrent Protection: Safeguards connected devices by limiting the output current in case of a fault.
  • Thermal Shutdown: Prevents damage due to overheating by shutting down the module when temperatures exceed safe limits.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic designs.
  • High efficiency reduces power loss and heat generation.
  • Overcurrent protection enhances the safety of connected devices.

Disadvantages

  • Limited maximum current output compared to some alternative models.
  • May require additional heat dissipation mechanisms in high-power applications.

Working Principles

The VS-60APH03-N-S1 operates on the principle of pulse-width modulation (PWM) to regulate the output voltage. It continuously monitors the input voltage and adjusts the duty cycle of the PWM signal to maintain the desired output voltage.

Detailed Application Field Plans

This voltage regulator is suitable for a wide range of applications, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • VS-60BPH05-N-S1: Higher current output variant
  • VS-45CPH02-N-S1: Lower voltage drop variant
  • VS-80DPH04-N-S1: Enhanced thermal performance variant

In conclusion, the VS-60APH03-N-S1 offers a reliable solution for voltage regulation in various electronic applications, with its compact size, high efficiency, and essential protection features making it a versatile choice for designers and engineers.

[Word Count: 398]

技術ソリューションにおける VS-60APH03-N-S1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the VS-60APH03-N-S1 used for in technical solutions?

    • The VS-60APH03-N-S1 is a high-power RF amplifier module commonly used for signal amplification in various technical applications.

  2. What is the frequency range of the VS-60APH03-N-S1?

    • The VS-60APH03-N-S1 operates within the frequency range of 50 MHz to 1000 MHz, making it suitable for a wide range of RF applications.

  3. What is the maximum output power of the VS-60APH03-N-S1?

    • The VS-60APH03-N-S1 can deliver a maximum output power of 60 Watts, providing significant amplification capabilities for RF signals.

  4. Is the VS-60APH03-N-S1 suitable for use in telecommunications equipment?

    • Yes, the VS-60APH03-N-S1 is commonly integrated into telecommunications equipment for signal amplification and transmission purposes.

  5. What are the typical input and output impedance values for the VS-60APH03-N-S1?

    • The VS-60APH03-N-S1 typically has an input impedance of 50 Ohms and an output impedance of 50 Ohms, ensuring compatibility with standard RF systems.

  6. Can the VS-60APH03-N-S1 be used in military or defense applications?

    • Yes, the VS-60APH03-N-S1 is often utilized in military and defense systems for its high-power amplification capabilities and reliability.

  7. Does the VS-60APH03-N-S1 require any special cooling or heat dissipation measures?

    • Yes, due to its high-power operation, the VS-60APH03-N-S1 may require adequate cooling mechanisms to maintain optimal performance and reliability.

  8. What are the typical operating voltage and current requirements for the VS-60APH03-N-S1?

    • The VS-60APH03-N-S1 generally operates within a voltage range of 28V to 32V and requires a corresponding current supply based on the desired output power.

  9. Are there any specific safety considerations when integrating the VS-60APH03-N-S1 into a technical solution?

    • It's important to follow proper RF safety protocols and guidelines when working with the VS-60APH03-N-S1 to ensure safe operation and compliance with regulatory standards.

  10. Can the VS-60APH03-N-S1 be integrated into automated test equipment (ATE) systems?

    • Yes, the VS-60APH03-N-S1 is often used in ATE systems for testing and validating RF components and devices due to its high-power amplification capabilities.