Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
VS-MBRS120TRPBF

VS-MBRS120TRPBF

Product Category: Rectifier Diode

Basic Information Overview: - Category: Electronic Component - Use: Rectification of AC to DC in electronic circuits - Characteristics: High current capability, low forward voltage drop, fast switching speed - Package: SMB (DO-214AA) - Essence: Efficient rectification of power supply in electronic devices - Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications: - Forward Voltage Drop: 0.49V @ 1A - Reverse Voltage: 20V - Forward Current: 1A - Reverse Recovery Time: 15ns - Operating Temperature Range: -65°C to +150°C

Detailed Pin Configuration: - Pin 1: Anode - Pin 2: Cathode

Functional Features: - Efficient rectification of AC to DC - Fast switching speed - Low forward voltage drop

Advantages and Disadvantages: - Advantages: - High current capability - Low forward voltage drop - Fast switching speed - Disadvantages: - Limited reverse voltage capability - Sensitive to temperature variations

Working Principles: The VS-MBRS120TRPBF operates based on the principle of semiconductor diode rectification, allowing the flow of current in one direction while blocking it in the opposite direction.

Detailed Application Field Plans: - Power supplies in consumer electronics - Battery charging circuits - LED lighting applications - Switching power supplies

Detailed and Complete Alternative Models: - 1N5817 - SS14 - RB520S

This comprehensive entry provides a detailed understanding of the VS-MBRS120TRPBF rectifier diode, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける VS-MBRS120TRPBF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the VS-MBRS120TRPBF?

    • The VS-MBRS120TRPBF is a Schottky diode rectifier designed for use in high-frequency DC-DC converters and power supplies.

  2. What is the maximum forward voltage of the VS-MBRS120TRPBF?

    • The maximum forward voltage of the VS-MBRS120TRPBF is typically around 0.55V at a forward current of 1A.

  3. What is the reverse voltage rating of the VS-MBRS120TRPBF?

    • The VS-MBRS120TRPBF has a reverse voltage rating of 20V, making it suitable for low voltage applications.

  4. What is the typical junction capacitance of the VS-MBRS120TRPBF?

    • The typical junction capacitance of the VS-MBRS120TRPBF is around 200pF at a reverse bias of 1V.

  5. What are the typical applications of the VS-MBRS120TRPBF?

    • The VS-MBRS120TRPBF is commonly used in high-frequency DC-DC converters, power supplies, and other electronic circuits requiring low forward voltage drop and fast switching.

  6. What is the maximum forward current rating of the VS-MBRS120TRPBF?

    • The VS-MBRS120TRPBF has a maximum forward current rating of 1A, making it suitable for low to moderate power applications.

  7. Does the VS-MBRS120TRPBF require a heatsink?

    • For most typical applications within its specified ratings, the VS-MBRS120TRPBF does not require a heatsink due to its low forward voltage drop and power dissipation.

  8. Is the VS-MBRS120TRPBF suitable for automotive applications?

    • Yes, the VS-MBRS120TRPBF is suitable for automotive applications where its characteristics meet the requirements of the specific design.

  9. What is the operating temperature range of the VS-MBRS120TRPBF?

    • The VS-MBRS120TRPBF has an operating temperature range of -65°C to +125°C, making it suitable for a wide range of environmental conditions.

  10. Can the VS-MBRS120TRPBF be used in parallel for higher current applications?

    • Yes, the VS-MBRS120TRPBF can be used in parallel to increase the current handling capability in applications that require higher current ratings. However, proper thermal management and current sharing considerations should be taken into account.