Digital tube driver/LED driver

icleddriverctrlrdim14sop

I am a 1.8inch LCD expansion board, 128×160 resolution, with internal controller, using SPI interface to communicate. My features] SPI control, to ensure that it does not take up too much interface pin resources, to provide a complete supporting information manual (Raspberry Pi/VisionFive2/Arduino/STM32 and other sample programs), [My parameters] driver chip: ST7735S, support interface: SPI, display color: RGB, 65K color, resolution: 128 × 160, backplane: SPI, display color: RGB, 65K color, backplane: SPI, backlight: SPI. Rate: 128×160, Backlight: LED, Operating voltage: 3.3V/5V.

DLP Display Controller for DLP230NP (0.23 1080p) DMD 176-NFBGA

TM1623C is an LED display driver with keypad scanning interface.

Boost LED Driver

Wafer TA1229B

Multi-color screen module Multi-color screen

LED Driver IC for Display Mode (8 segments x 6 bits ~ 10 segments x 4 bits)

Buck, Boost, Lift-off LED constant current driver. Heat dissipation enhanced ESOP8encapsulation, input and output: 3V~60V; output current can be up to 400mA, and has a soft start, thermal shutdown protection, input undervoltage protection, cycle-by-cycle current limit protection. Supports DC analog dimming with EN (0.6V~1.2V).