Logic device/transceiver/encoder

SN74AHC244 Octal Buffer/Driver with 3-State Outputs

SN74HC244 Octal Buffer and Line Driver with 3-State Outputs

8-Channel, 4.5V to 5.5V Buffer with TTL Compatible CMOS Inputs 20-SO -40 to 85

TXB0304 4-Bit Bidirectional Auto Direction Sense Converter with Fully Symmetrical 0.9V to 3.6V Range

SN74CBTLV3257 4-Channel 2:1 Analog Switch with Brownout Protection

SN74AHCT126 Quad Bus Buffer Gate with Three-State Outputs

The MM74HC08 AND gates are manufactured using an advanced silicon gate CMOS process, operating at speeds comparable to LS-TTL gates, with low power consumption of standard CMOS integrated circuits. The HC08 has buffered outputs for high noise immunity and is capable of driving 10 LS-TTL loads. The 74HC logic family is functionally and pin-out compatible with the standard 74LS logic family. All inputs are protected from electrostatic discharge damage by clamping internal diodes to VCC and ground.

Decoder/Demultiplexer 1 x 4: 10 1

High Speed ​​CMOS Logic Dual Retriggerable Monostable Multivibrator with Reset 16-PDIP -55 to 125

The high-performance silicon-gate CMOS MC74C4020A has the same pin-out as the standard CMOS MC14020B. The device inputs are compatible with standard CMOS outputs; pull-up resistors are included for compatibility with LSTTL outputs. The device consists of 14 master-slave flip-flops with 12 stages that are brought out to the pin. The output of each flip-flop feeds the next flip-flop, with half the frequency at each output of the previous one. Reset is asynchronous and active high. Due to internal ripple delays, the state changes of the Q outputs do not occur simultaneously. Therefore, the decoded output signal is prone to decode spikes and may have to be gated with the HC4020A's clock for some designs.