Optocoupler/LED/nixie tube/photoelectric device

The 6N137M, HCPL2601M, HCPL2611M single-channel and HCPL2630M, HCPL2631M dual-channel consist of an 850 nm AlGaAS LED optically coupled to a very high-speed integrated photodetector logic gate with tunable output. This output has an open collector allowing a wired OR output. Coupling parameters are guaranteed from -40°C to +85°C. Input signals up to 5mA provide a minimum output sink of 13mA (fan-out 8). Internal noise shielding provides excellent common-mode rejection, typically 10kV/µs. The HCPL2601M and HCPL2631M have a minimum CMR of 5kV/µs. The minimum CMR of the HCPL2611M is 10kV/?s.

5050RGBW four-in-one red, green, blue and white light 5000K

SMD LED; 0402 normal green/yellow green; 1005 normal green/yellow green; lens color: colorless and transparent; light angle: 130°; power: 65mW; working temperature: -30℃~+85℃;\nsize 1.0 *0.5*0.35; IF=5ma: 1.6~2.6v, 565~576nm, 6~16mcd\nUltra-thin, gold wire, high light intensity, low power consumption, good reliability, long life

The H11FXM series consists of an AlGaAs infrared emitting diode coupled to a symmetrical bi-directional silicon photodetector. The detector is galvanically isolated from the input like an ideally isolated FET, suitable for distortion-free control of low-level AC and DC analog signals. The H11FXM series devices are installed in a two-wire in-capsulation.

-

1210 red (with lens four-legged common cathode)

The MOC301XM and MOC302XM series are opto-isolated triac driver devices. These devices consist of a GaAs infrared light-emitting diode and a photosensitive silicon bidirectional switch that functions like a triac. These devices are suitable for use as an interface between electronic control and power triacs to control resistive and inductive loads operating at 115 VAC.