Power chip

Input Voltage (Nominal) 24 Output Voltage (VDC) 5 Minimum Current (mA) 0 Maximum Current (mA) 200 Full Load Efficiency (%) 82 Maximum Capacitive Load (uF)

20 V, 200 mA Low Noise CMOS LDO Linear Regulator

DC-DC module, input range: 10.8V~13.2V, dual output: ±5V/±200mA

DIP, 50.8x25.4x15mm, input range DC18~36V/2,1, output 24V, 40W, isolation voltage greater than 1.5kV, 2x1 inch international standard, industrial grade, T_LD-40WR3 series module power efficiency up to 92%, compatible with TVRB2424LD- 40WR3

The NCP6151S/NCP6151SA/NCP6131S/NCP6131SA dual-output four-plus-one-phase step-down solution is suitable for Intel VR12-compatible CPUs. The controller combines true differential voltage sensing, differential direct sense DCR current sensing, input voltage feed-forward, and adaptive voltage positioning to provide accurately regulated power for desktop and notebook applications. The control system is based on dual-edge pulse-width modulation (PWM) combined with DCR current sensing, which provides the fastest initial response to dynamic load events, reducing system cost. It also enables single-phase during light-load operation and provides automatic frequency scaling at light loads while maintaining excellent transient performance.

TPS794 Ultralow Noise, High PSRR, Fast 250mA Low Dropout Linear Regulator

18～36V input, ±15V output, 8Watt, isolation 1500V

Input Voltage: 4.5-5.5Vdc\nOutput Voltage: 3V\nOutput Current: 0.606A\nOutput Power: 2W\nIsolation Voltage: 1500Vdc\nConversion Efficiency: 90%\nFeature: Output Short Circuit Protection

LM43602 LM43602/03 3.5 - 36V 2A, 3A Low Quiescent Current Buck Converter