Power chip

Low-Cost, Microprocessor Supervisory Circuit, Threshold Voltage = 3.08V

Input/output isolation withstand voltage: 1500VDC 0.5mA 1Minute\nOutput ripple (20MHz bandwidth): 200mVp-p Max\nOutput noise (20MHz bandwidth): 250mVp-p Max\nInput voltage: +12VDC (9VDC~18VDC) \nOutput voltage 1: +18VDC±2%. Output current 1: +1.11A Max\nOutput voltage 2: -18VDC±2%, Output current 2: -1.11A Max\nEfficiency: 83% Min\nWork Shell temperature: -40°C~+85°C\nStorage temperature: -40°C~+125°C\nEnvironmental characteristics: Maximum working shell temperature: 85°C Relative temperature: 10%~90%\nWith Good shielding interference performance and electromagnetic compatibility, short circuit protection, self-recovery and other functions.

Bilinear integrated circuit, voltage monitoring, detection voltage is 2.9V

The FSL136HR integrates a Pulse Width Modulation (PWM) controller and SenseFET and is specifically designed for high performance offline Switch Mode Power Supplies (SMPS) with minimal external parts count. The FSL136MR includes an integrated high-voltage power switching regulator combining an avalanche-rugged SenseFET with current-mode PWM control. Features of the integrated PWM controller include: undervoltage lockout (UVLO) protection, leading edge spacing (LEB), frequency generator for EMI attenuation, optimized gate on/off driver, high temperature shutdown (TSD) protection , a temperature compensated precision current source for loop compensation, and a fault protection circuit. FSL136HR provides good soft-start performance. Compared to discrete MOSFET and controller or RCC switching converter solutions, the FSL136HR can reduce overall parts count, design size and weight; while improving energy efficiency, productivity and system reliability. This device provides a basic platform for cost-effective flyback converter designs.

TPS2034 2.2A, 2.7-5.5V Single Hot-Swap IC High-Side MOSFET with Fault Reporting and Active High Enable

TPS3128 Supply Voltage Supervisor with Watchdog Timer and Manual Reset

-

1.8V 150mA

AC DC: input voltage 220VAC, output voltage: 24VDC, number of output channels: 1, power 6W

DC Tail Motor, Steering Gear Motor Driver IC